怎样去除搅拌机上的刮痕？_公司新闻_新闻资讯_全自动上料搅拌机车_自动上料搅拌机厂家-山东山汽工程机械有限公司

新闻资讯

行业新闻公司新闻

热点推荐

自动上料搅拌机配件是由哪两部分组成的？

2022-12-23

修路有哪些不错的机械设备？先说说这个小型搅拌车

2022-12-19

自上料搅拌车操作须知的五项重要内容

2022-12-16

自上料拌和车的特征有哪些？

2022-12-12

自动上料搅拌车能解决哪些施工难题？

2022-12-02

混凝土搅拌车的刹车片要怎样挑选合格

2022-11-14

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

怎样去除搅拌机上的刮痕？

所属分类：公司新闻发布时间：2020-10-28 来源：http://www.shanqijituan.com 浏览量：0

全自动上料搅拌机在使用的进程中会遭受各种的刮痕和损坏。有的人觉得刮痕没有什么太大的问题，其实不然，假如一体车上的刮痕假如不及时处理的话，时间一长将会对一体车会收到损坏。接下来小编就跟大家聊一聊全自动上料搅拌机该如何保养，不小心蹭上划痕该怎么办。一起来看一下吧！

Automatic feeding mixer will suffer from various scratches and damages in the process of use. Some people think that there is no big problem with scratches. In fact, if the scratches on the integrated vehicle are not handled in time, the integrated vehicle will be damaged over a long period of time. Next, Xiaobian will talk to you about how to maintain the automatic feeding mixer and how to do if you scratch it carelessly. Let's have a look!

1、磨损伤痕的处理：

1. Treatment of wear scar:

一体车受到摩擦而构成的伤痕，咱们可以为车辆涂上镀膜剂，涂抹进程要注意涂抹均匀。

We can apply the coating agent to the vehicle for the scratches caused by friction. The coating process should be uniform.

2、保险杠伤痕的修补：

2. Repair of bumper scar:

保险杠的伤痕处理办法是将毛刺削去，坑洼部分涂上油灰使之滑润。专用油灰，准备各种色彩，挑选较接近的色彩。与装载机式一体车车身同色的保险杠，喷漆很重要。

The way to deal with the bumps is to polish the bumps. Special putty, prepare a variety of colors, choose a closer color. It is very important to paint the bumper in the same color as the body of the loader type all-in-one vehicle.

3、车身老化、伤痕的处理：

3. Treatment of body aging and scar:

不管什么样的一体车都会有或大或小的伤痕。假如是不太夺目的伤痕，就可以不用去管它；假如一体车仅仅很浅的刮伤表漆，立即用混合剂处理，擦洗办法为直线擦洗。伤痕消失后，用更细的混合剂擦洗之后再打上蜡。

No matter what kind of all-in-one car, there will be big or small scars. If it is not too eye-catching scars, it can not be taken care of; if the integrated car only scratch the surface paint, immediately use mixture treatment, scrubbing method for straight-line scrubbing. After the scars disappear, scrub them with a finer mixture and wax them.
全自动上料搅拌机

4、较深伤痕的修补：

4. Repair of deep wounds:

很深但细长的伤痕，用五颜六色油灰可以修补得很好。伤痕处用砂纸，不要随意将伤痕面扩展，重要的是将脏污清除干净。油灰要细心得涂抹，是指彻底进入内部。然后涂上混合剂、上蜡，完毕作业。

It's a deep but slender scar that can be repaired well with colorful putty. Sand paper should be used for the scar. It is important to remove the dirt. Putty to be carefully applied, refers to thoroughly into the interior. Then apply the mixture, wax, finish the operation.

5、刮伤、表漆脱落的修补：

5. Repair of scratch and surface paint falling off:

较深的刮痕，可以用润饰漆进行修补。用笔尖一点一点地址上去，然后等漆彻底干。

Deep scratches can be repaired with touch up paint. Use the tip of a pen to address it, and then wait for the paint to dry completely.

6、凹陷的修补保养诀窍：

6. Tips for repairing and maintaining sunken

凹陷处理是车身保养中叫费事的作业之一，首先要打好底子。喷漆时注意不要使涂料向周围扩散。

Sunken treatment is one of the troublesome operations in body maintenance. First of all, we should lay a good foundation. Pay attention not to spread the paint around when spraying.

以上是关于怎样去除全自动上料搅拌机上刮痕的介绍，希望对大家有所帮助，如您想了解更多内容欢迎点击咨询http://www.shanqijituan.com网站。

The above is about how to remove the scratch on the automatic feeding mixer, hope to help you, if you want to know more, welcome to click consultation http://www.shanqijituan.com Website.

上一页：保养全自动上料搅拌机时不能忽略的几点要求！下一页：如何保证小型混凝土搅拌机的安全运作？