自动上料搅拌车车载数据的技能检查_常见问题_全自动上料搅拌机车_自动上料搅拌机厂家-山东山汽工程机械有限公司

常见问题

热点推荐

自动上料搅拌机配件是由哪两部分组成的？

2022-12-23

修路有哪些不错的机械设备？先说说这个小型搅拌车

2022-12-19

自上料搅拌车操作须知的五项重要内容

2022-12-16

自上料拌和车的特征有哪些？

2022-12-12

自动上料搅拌车能解决哪些施工难题？

2022-12-02

混凝土搅拌车的刹车片要怎样挑选合格

2022-11-14

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动上料搅拌车车载数据的技能检查

所属分类：常见问题发布时间：2021-05-07 来源：http://www.shanqijituan.com 浏览量：0

根据自动上料搅拌车数据采集终端的实际需求，再考虑到模块的通用性确定终端技术指标如下。

According to the actual demand of data acquisition terminal of automatic feeding mixer, and considering the universality of the module, the technical indexes of the terminal are determined as follows.

（1）模块工作电压：本终端的工作电压来源于车载电瓶，通常为 12V 或者24V，模块电压应小于电源电压；

(1) Module working voltage: the working voltage of the terminal comes from the vehicle battery, usually 12V or 24V, and the module voltage should be less than the power supply voltage;

（2）通讯方式：可采用无线网络和短信息方式通讯；（3）终端在线率：为了确保终端与监控数据交流的实时性，终端应保持高在线率；

(2) Communication mode: wireless network and short message communication can be adopted（ 3) Terminal online rate: in order to ensure the real-time data communication between the terminal and the monitoring center, the terminal should maintain a high online rate;

（4）丢包率：丢包率是指测试中，所丢失数据包数量占所发送数据包的比率，为了降低数据丢包率，在设计中可以考虑，发生无线传输模块不能连接网络，导致终端不能登录系统的情况时，待无线传输模块脱离盲区后，将数据补传至服务器；

自动上料搅拌机

(4) Packet loss rate: packet loss rate refers to the ratio of the number of lost packets to the number of sent packets in the test. In order to reduce the packet loss rate, it can be considered in the design that when the wireless transmission module cannot connect to the network, resulting in the terminal unable to log in to the system, the data will be sent to the server after the wireless transmission module is out of the blind area;

（5）定位精确度：车辆监控调度系统的电子地图精度数量级是米，我国二级道路的标准宽度为 30~60m，如果要对车辆进行准确的监控，定位精度需控制在30m 以内，否则，当两条道路的距离过近时，就可能出现定位错误，即正在某条公路上行驶的车辆被定为在道路外或其它道路上。

(5) Positioning accuracy: the accuracy of the electronic map of the vehicle monitoring and dispatching system is in the order of meters. The standard width of the secondary road in China is 30 ~ 60m. If the vehicle is to be monitored accurately, the positioning accuracy should be controlled within 30m. Otherwise, when the distance between the two roads is too close, positioning errors may occur, That is to say, the vehicles driving on a certain highway are classified as outside the road or on other roads.

购买产品重要的是质量，选择商家选择是诚信，自动上料搅拌机真诚的为广大客户提供优良的服务，欢迎大家在网站：http://www.shanqijituan.com 下方留言咨询.

The most important thing to buy products is quality. Choosing merchants is honesty. Automatic feeding mixer sincerely provides excellent service for customers. Welcome to visit our website: http://www.shanqijituan.com Below message consultation

上一页：怎样区分您使用的是全自动上料搅拌车？下一页：为什么全自动上料搅拌机会出现高噪声高温？