1、搅拌车搅拌筒的旋转由液压马达通过专用行星减速机带动，行星减速机的输出轴可以实现一定角度的摆动，以满足恶劣路况下搅拌筒的跳动。
1. The rotation of the mixer drum is driven by the hydraulic motor through a special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixer drum under bad road conditions.
2、液压系统采用恒功率变量柱塞泵，减少发动机的功率损耗。
2. Constant power variable piston pump is used in the hydraulic system to reduce the power loss of the engine.
3、进水系统可根据计量设定实现自动进水。
3. The water inlet system can automatically feed water according to the metering setting.
4、干料上料，按照设计好的配比由铲臂、动臂缸、定量的料斗自动上料。
4. Dry material feeding, according to the designed proportion, automatically feeding by shovel arm, boom cylinder and quantitative hopper.
5、自动上料搅拌车搅拌筒内壁上设置双螺旋形叶片，正向旋转为进料、混凝土搅拌；反向旋转，在螺旋叶片的推动下、混凝土由出料口出料。
5. A double spiral blade is arranged on the inner wall of the mixing cylinder of the automatic feeding mixing truck, which rotates in a positive direction for feeding and concrete mixing; Under the push of the spiral blade, the concrete is discharged from the discharge port.
6、行走系统由发动机通过液力变矩器、前后传动轴到前后桥。本发明采用前后双桥驱动形式。采用液力变矩器减少对发动机的冲击、延长了发动机的寿命。
6. The traveling system is composed of engine, hydraulic torque converter, front and rear transmission shaft and front and rear axle. The invention adopts a front and rear double axle driving form. The hydraulic torque converter is used to reduce the impact on the engine and prolong the service life of the engine.
自动上料搅拌车的驾驶室旁有个大臂，称为装载臂，驾驶员在驾驶室内操作，装载臂就能进行系列降落、铲料、升起动作，待一名工人将料摆好后，驾驶员操纵装载臂落下铲料，铲料完毕后，驾驶员再操纵装载臂升起，将铲斗升至搅拌罐口处，继续操纵打开铲斗后仓口，铲斗内的物料就能准确进入搅拌罐了。
There is a big arm beside the cab of the automatic feeding mixer, which is called the loading arm. When the driver operates in the cab, the loading arm can perform a series of landing, shoveling and lifting actions. After a worker sets the material, the driver controls the loading arm to drop the shovel. After the shovel is finished, the driver controls the loading arm to rise and lift the bucket to the mixing tank, Continue to operate and open the back bin opening of the bucket, and the materials in the bucket can accurately enter the mixing tank.
所以，自动上料搅拌车的“自动”上料，就是这么简单。正常来讲，两名人工就能顺利操作，一名人工在驾驶室操作，一名人工协助摆料，待料搅拌好后，直接运送至施工地，卸料口可在周身270度卸料，正是这高自动化程序，才省下不少人工费用。
Therefore, the "automatic" feeding of automatic feeding mixer is so simple. Normally, two people can operate smoothly, one is in the cab, and the other is in the assistance of placing materials. After the materials are mixed, they are directly transported to the construction site, and the discharge port can discharge materials at 270 degrees around the body. It is this highly automated procedure that saves a lot of labor costs.
另外，铲斗的工艺及细节设计能使这自动化程序更上一层楼，如优重混凝土搅拌车，铲斗容量不仅大，圆弧结构的底部不论是装料还是卸料，都很是顺畅，铲斗中间的锯齿长条能在上水泥料时直接将袋子割破，工人只需要将水泥袋扔进铲斗就可以......诸如此类的细节设计不仅用心，搅拌车效率也更高了。
In addition, the technology and detailed design of the bucket can make the automatic process to a higher level. For example, the bucket capacity of the high-weight concrete mixer is not only large, the bottom of the arc structure is very smooth, whether loading or unloading, and the serrated strip in the middle of the bucket can directly cut the bag when loading cement, Workers just need to throw the cement bag into the bucket... Details like this are not only carefully designed, but also more efficient.
Today's automatic feeding mixer wonderful content to share with you, more wonderful content please click on our website http://www.shanqijituan.com Follow the message, there will be more wonderful content for you
山汽官方微信
2022-12-23
首页
产品
电话
置顶