自动上料搅拌车属于特种专项作业车辆，它有特定的工作环境，发动机水温难免会有过高的的时候。每当出现有这种情况时会对设备造成一定的影响。那么水温过高需要怎么处理呢？接下来小编就告诉大家。
Automatic feeding mixer is a special operation vehicle. It has a specific working environment, and the engine water temperature will inevitably be too high. Whenever this happens, it will have a certain impact on the equipment. So what should we do if the water temperature is too high? Next, Xiaobian will tell you.
1、自动上料搅拌车在普通公路上发动机出现了过热，应该尽快地降低车速，把汽车驶到树荫下，或驶到相对比较凉快的地方，把汽车停下来，但这时候不要急于熄火。
1. If the engine of the automatic loading mixer truck overheats on ordinary roads, you should reduce the speed as soon as possible, drive the car to the shade of trees or to a relatively cool place, and stop the car, but don't be in a hurry to turn off the engine at this time.
2、打开发动机罩盖，让发动机怠速运转，等待发动机温度逐渐恢复正常。在发动机水温恢复正常之后，将发动机熄火。然后再等待一段时间，直到发动机的水温充分地下降了之后，再检查发动机的冷却水量。
2. Open the engine hood, let the engine idle and wait for the engine temperature to gradually return to normal. After the engine water temperature returns to normal, turn off the engine. Then wait for a period of time until the water temperature of the engine drops sufficiently, and then check the cooling water volume of the engine.
3、这时候自动上料搅拌车发动机的冷却水量可能大都严重不足。按着规定量把冷却水补足之后，再检查一下冷却系统，确认没有其他故障之后，可以起动发动机，继续行驶。也要检查一下水箱百叶窗是不是被异物堵塞，风扇叶的工作情况，发动机皮带是否打滑，发动机水泵工作情况等。
3. At this time, the cooling water of the automatic charging mixer engine may be seriously insufficient. After replenishing the cooling water according to the specified amount, check the cooling system. After confirming that there are no other faults, start the engine and continue driving. Also check whether the shutter of the water tank is blocked by foreign matters, the working condition of the fan blade, whether the engine belt slips, the working condition of the engine water pump, etc.
混凝土搅拌机设备在操作使用过程中，会因为长时间不停的运转导致其温度有所提高，但是如果超过设备本身所能够承受的温度，就会导致其设备受到一定的损坏。为此，当设备温度出现过高的时候，就需要我们对其做好相应的保养工作，下面一起了解一下吧。
During the operation and use of concrete mixer equipment, its temperature will increase due to long-term non-stop operation, but if it exceeds the temperature that the equipment itself can withstand, it will cause certain damage to its equipment. Therefore, when the equipment temperature is too high, we need to do the corresponding maintenance work. Let's learn about it together.
1、防止发动机机体过热：由于环境温度比较高，因此发动机容易过热，要加强对发动机冷却系统的检查、保养，这包括水箱、节温器、水泵、风扇等部件的检查，并且要注意及时加注冷却水。当水温超过100℃时，应在阴凉处停车降温，让发动机怠速运转，并掀开发动机罩帮助散热。
1. Prevent overheating of engine block: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to filling cooling water in time. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine idle, and lift the engine hood to help dissipate heat.
2、防止发动机爆燃：夏季气温较高，有时会超过35℃，而这样的季节，对于一些部件有所老化的汽车来说，发生自然爆燃等的概率也高出很多。所以要做好防范准备。
2. Prevention of engine deflagration: the temperature is high in summer, sometimes exceeding 35 ℃. In this season, the probability of natural deflagration is also much higher for cars with aging parts. So be prepared.
3、防止车漆受损：车漆经过强烈的阳光曝晒，会发旧、起皱，而普通的美容打蜡虽然可以起到一定的预防暴晒效果，但由于任何车蜡都含有矽的成分，久经紫外线照射会锈蚀车漆，留下点点黑斑。车蜡本身起不到增强硬度作用，反而会因温度过高而很快流失，停车时要注意尽量把车停放在阴凉处。
3. Prevent damage to the car paint: the car paint will become old and wrinkled after strong sunlight exposure. Although ordinary beauty waxing can play a certain role in preventing exposure, because any car wax contains silicon, it will rust the car paint after a long time of ultraviolet radiation, leaving a little black spots. The car wax itself can not enhance the hardness, but will quickly lose due to excessive temperature. When parking, pay attention to parking the car in a cool place as far as possible.
4、防止车胎爆裂：气温高所以比较容易爆胎，温度过高时很容易使轮胎变形，抗拉力下降。而作为轮胎本身，气压不标准、轮胎老化、性能减弱，或者在行驶过程中轮胎轧到了坚硬的金属或其他硬物等情况，都会导致汽车突然间爆胎。
4. Prevent tire burst: the temperature is high, so it is easy to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile force. As for the tire itself, non-standard air pressure, tire aging, performance weakening, or the tire is rolled to hard metal or other hard objects during driving will lead to sudden tire burst.
5、防止发动机润滑不良：温度高时，机油粘度下降造成润滑不良。所以要经常检查油量油质，并及时添加或更换。要注意及时清洗机油滤清器、散热器，保证机油通畅、散热良好，并尽量避免发动机超负荷工作。
5. Prevent poor engine lubrication: when the temperature is high, the oil viscosity decreases, resulting in poor lubrication. Therefore, the oil quantity and quality should be checked frequently, and added or replaced in time. Pay attention to timely clean the oil filter and radiator to ensure smooth oil and good heat dissipation, and try to avoid overload of the engine.
6、防止刹车制动失灵：制动液在高温环境中更容易蒸发汽化，在制动管路中形成气阻，制动蹄片也容易烧蚀，造成制动失灵。所以要经常检查调整制动系统，下长坡途中应注意停车晾刹，保证制动性能良好。如果发现制动毂发烫，应停车降温，但不可浇泼冷水，以防制动毂破裂。
6. Prevent brake failure: the brake fluid is easier to evaporate and vaporize in the high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are also easy to be ablated, resulting in brake failure. Therefore, check and adjust the braking system frequently. Pay attention to parking and braking on the way down a long slope to ensure good braking performance. If the brake hub is hot, stop the vehicle to cool down, but do not pour cold water to prevent the brake hub from cracking.
相信大家也都知道任何的机械设备操作使用的过程中都是三分使用，七分保养，只有这样才能够保证设备在正常运行中的良好性能，以及延长其设备的使用寿命，希望大家能够依照这些知识对设备进行合理的施工使用。
I believe we all know that the operation and use of any mechanical equipment is divided into three parts for use and seven parts for maintenance. Only in this way can we ensure the good performance of the equipment in normal operation and prolong the service life of the equipment. I hope you can carry out reasonable construction and use of the equipment according to these knowledge.
山汽官方微信
2022-12-23
首页
产品
电话
置顶