全自动上料搅拌机使用过程中清洗很重要
It is very important to clean the full-automatic feeding mixer during use
全自动上料搅拌机一般在放料完成后,卸料部分会残留许多混凝土,一般情况下用清水清理即可,可是遇到已经凝固在混凝土搅拌运输罐上的情况下,我们该怎么办? 混凝土搅拌运输罐在完成方料后就应当进行清洗保养及维护。
Generally, a lot of concrete will remain in the discharge part of the full-automatic feeding mixer after discharging. Generally, it can be cleaned with clean water, but what should we do when it has solidified on the concrete mixing and transportation tank? The concrete mixing and transportation tank shall be cleaned, maintained and maintained after the completion of square materials.
以免降低混凝土搅拌运输罐的使用寿命,许多罐车司机们也知道这个道理,也经常对混凝土搅拌运输罐卸料部分进行清理维护,但是有一个问题就是大家往往忽略的,就是用不好用不对清洗液也是会造成卸料部分损坏的。
In order to avoid reducing the service life of the concrete mixing and transportation tank, many tank truck drivers also know this truth and often clean and maintain the unloading part of the concrete mixing and transportation tank. However, there is a problem that we often ignore, that is, the unloading part will be damaged if it is not easy to use and the cleaning solution is not used properly.
1、用好的清洗液,掌握正确的方法,适当用量,正确的使用标准可以参考清洗液的说明书,而且要适量,否则清洗液里面的化学成分会损坏混凝土搅拌运输罐的相关结果。
1. Use a good cleaning solution, master the correct method, appropriate dosage and correct use standard. Refer to the instructions of the cleaning solution, and be appropriate, otherwise the chemical composition in the cleaning solution will damage the relevant results of the concrete mixing and transportation tank.
2、选择清洗液,一般用常见的碱性溶液,不要使用化学成分高的,浓度高的清洗产品。 混凝土搅拌运输罐在日常生活中是使用非常频繁的,所以,清洗混凝土搅拌运输罐也是相当重要的。
2. Choose cleaning solution, generally use common alkaline solution, and do not use cleaning products with high chemical composition and high concentration. Concrete mixing transport tank is frequently used in daily life, so it is also very important to clean concrete mixing transport tank.
This article is provided by the automatic feeding mixer. Our website is: http://www.shanqijituan.com/ We will serve you with wholehearted enthusiasm. Welcome to visit!