自动上料搅拌机轮边减速器的工作原理_行业新闻_新闻资讯_全自动上料搅拌机车

新闻资讯

行业新闻公司新闻

热点推荐

自动上料搅拌机配件是由哪两部分组成的？

2022-12-23

修路有哪些不错的机械设备？先说说这个小型搅拌车

2022-12-19

自上料搅拌车操作须知的五项重要内容

2022-12-16

自上料拌和车的特征有哪些？

2022-12-12

自动上料搅拌车能解决哪些施工难题？

2022-12-02

混凝土搅拌车的刹车片要怎样挑选合格

2022-11-14

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动上料搅拌机轮边减速器的工作原理

所属分类：行业新闻发布时间：2020-06-01 来源：http://www.shanqijituan.com 浏览量：0

　　自动上料搅拌机在轮子的一侧有一个减速器。让我们来谈谈这个减速器是如何工作的。

　　The automatic feeding mixer has a reducer on one side of the wheel. Let's talk about how the reducer works.

　　轮边减速器是的减速齿轮传动系扭装置,轮边减速器能够满足总传动比在相同条件下,变速器,传动轴,主减速器,差速器,半轴部分,如负荷减少,小尺寸和驱动桥的优势得到更大的间隙从地面,广泛用于卡车、大型搅拌车,越野车辆和其它大型工矿交通。因此，对轮边减速器的研究具有十分重要的现实意义和企业实用性。

　　The wheel reducer is the final reduction gear transmission torsion device. The wheel reducer can meet the total transmission ratio under the same conditions, the transmission, transmission shaft, main reducer, differential, half shaft parts, such as load reduction, small size and the advantages of drive axle get more clearance from the ground, widely used in trucks, large-scale mixer vehicles, cross-country vehicles and other large-scale industrial and mining traffic. Therefore, the research on the wheel reducer has very important practical significance and enterprise practicability.

　　目前，采用齿轮侧减速器来满足整个传动系统的配套需求，并增设一套减速转矩齿轮传动装置。安装在搅拌器的功率输出端，以减轻变速箱的负荷。采用轮边减速机来提高混凝土搅拌机的驱动力，以满足或纠正整个传动系统驱动力的匹配。

　　At present, the gear side reducer is used to meet the matching needs of the whole transmission system, and a set of reduction torque gear transmission device is added. It is installed at the power output end of the agitator to reduce the load of the gearbox. The wheel reducer is used to improve the driving force of the concrete mixer, so as to meet or correct the matching of the driving force of the whole transmission system.

　　发动机通过离合器点火，传递传递动力到主减速器的前桥和后桥，然后从主减速器的输出到轮侧减速器和车轮，来驱动混凝土搅拌机。在此过程中，轮侧减速器的工作原理是将主减速器的速度和扭矩传递到车轮后，使其减速和扭矩增大，从而使车轮在反作用力的作用下，产生更大的驱动力。

　　The engine ignites through the clutch, transmits the transmission power to the front and rear axles of the main reducer, and then outputs from the main reducer to the wheel side reducer and wheels to drive the concrete mixer. In this process, the working principle of the wheel side reducer is to transfer the speed and torque of the main reducer to the wheel, so that it can reduce the speed and increase the torque, so that the wheel can produce more driving force under the reaction force.

　　以上是自动上料搅拌机小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.shanqijituan.com

　　The above is the introduction of the automatic feeding mixer. If you want to know more, please visit the website: http://www.shanqijituan.com

上一页：全自动上料搅拌机发生侧翻的机率有多大？下一页：在隧道内使用自上料搅拌车方便吗？