全自动上料搅拌机如果出现了锈迹，不仅仅会使车变的不美观，还会腐蚀搅拌车，因此我们要在日常生活中时刻检查全自动上料搅拌机，如果发现有生锈的痕迹，就要及时处理。
If the full-automatic feeding mixer has rust, it will not only make the car ugly, but also corrode the mixer. Therefore, we should always check the automatic feeding mixer in our daily life, and if we find any traces of rust, we should deal with them in time.
1、警惕好点小伤疤
1. Watch out for small scars
经常出现全自动上料搅拌机车漆表面水泥搅拌车生锈，除了常见的碰撞，刮伤，驾驶轮胎弹出小石块在油漆，也会导致小剥落的油漆点时间长会产生水泥搅拌车生锈斑。和大多数的小伤疤，因为很小，容易被忽略。因此，定期检查车身，发动机舱口和身体四周，一旦发现将及时进行处理。
The cement mixer on the paint surface of the full-automatic feeding mixer often rusts. In addition to the common collision, scratch, small stones ejected from the driving tire in the paint, small peeling paint spots will be caused for a long time, resulting in rust spots on the cement mixer truck. And most of the small scars, because they are small, are easy to ignore. Therefore, regular inspection of the body, engine hatch and around the body, once found will be dealt with in a timely manner.
2、经常检查适度容易积水的地方
2. Check the place where water is easy to accumulate
全自动上料搅拌机行驶在路上，在雨雪天气或通过泥水路很难避免，比如一些空间底部的全自动上料搅拌机车身和地板等处容易积累污泥，如车主不及时清理，将会使水分隐藏。全自动上料搅拌机车轮内部和外部边缘，边缘角底部的门，树干，车门锁眼和活跃挡风玻璃刮水器的一部分，要经常检查大门，想要保持身体的各个部分同时排水明沟，湿度检查小泵覆盖，如地毯、地板等，防止全自动上料搅拌机生锈。
When the full-automatic charging mixer is on the road, it is difficult to avoid it in rainy and snowy weather or passing through the muddy waterway. For example, sludge is easily accumulated in the body and floor of the full-automatic charging mixer at the bottom of some spaces. If the owner does not clean it in time, the water will be hidden. Full automatic feeding mixer wheel internal and external edge, edge corner, bottom door, trunk, door keyhole and active windshield wiper part, should always check the door, want to keep all parts of the body at the same time drainage ditch, humidity check small pump cover, such as carpet, floor, etc., to prevent the full automatic feeding mixer from rusting.
3、软漆做封釉
3. Soft paint for sealing glaze
漆软沙粒子击中小泵车在高速的过程中可能会导致掉漆。对于这种，能给车身封釉，它可以形成一个网络，强大的保护膜，提高表面硬度，效果可以保持一年左右，涂层可以达到类似的效果。此外，可以将车辆底部的底盘装甲或密封模型，这样可以保护底盘耐酸雨、耐腐蚀，使原涂层和干裂，不易脱落，也可以防止底盘上的鹅卵石的影响驾驶。
The paint may fall off in the process of high speed. For this, it can seal the body glaze, it can form a network, strong protective film, improve the surface hardness, the effect can be maintained for about a year, the coating can achieve similar effect. In addition, the chassis armor or sealing model at the bottom of the vehicle can protect the chassis from acid rain and corrosion, make the original coating and dry crack, not easy to fall off, and also can prevent the influence of pebbles on the chassis on driving.
The above is about the automatic feeding mixer to prevent rust related introduction, thank you for reading, hope to help you, want to learn more, welcome to click the automatic feeding mixer http://www.shanqijituan.com Official website.
山汽微信
2022-12-23
首页
产品
电话
置顶