1、自上料搅拌车卸料前让搅拌罐全速运转一两分钟。让混凝土充分搅拌,必要时可以加一些水,让混凝土搅拌得更均匀,也方便卸料。
1. Let the mixing tank run at full speed for oneortwo minutes since the loading mixer is unloaded. Allow the concrete to be fully mixed. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.
2、自上料搅拌车搅拌罐一定要仔细地冲洗干净。洗罐子时要仔细的冲洗干净,并把水反复的正反转两次,再放出来,一趟时把水箱的水全部放进罐子,再回到站加水清洗罐子。
2. The mixing tank of the self loading mixer must be washed carefully. Wash the cans carefully, and repeat the positive and negative rotation of the water twice, and then put it out. Put all the water in the water tank into the cans once, and then return to the station to add water to clean the cans.
3、卸料不要大意和放料工打好关系。放料时自己看着,免得放料工乱操作放料操作杆,每次自上料搅拌车罐子正反转中间位子时停一下,保护减速机,托轮等。与放料工打好关系,卸料时也不要睡的太熟,万一工人闹情绪,把你自上料搅拌车放到工地不转罐子,造成闷罐就麻烦了。
3. Don't be careless in discharging and have a good relationship with the discharging worker. Watch by yourself when discharging, so as to avoid the discharging worker's disorderly operation of the discharging lever. Stop every time when the tank of the charging mixer is reversing the middle position, and protect the reducer, supporting wheel, etc. Have a good relationship with the discharging workers, and don't sleep too well when discharging. In case the workers are in a mood, put your self loading mixer on the construction site without turning the cans, causing trouble in stuffing the cans.
4、放料前先把出料斗溜槽打湿。放料时把车尽量停在平地上放料前先把出料斗溜槽打湿,方便清洗。
4. Wet the chute of the discharge hopper before discharging. When discharging, park the car on the flat ground as far as possible, and wet the chute of the discharge hopper before discharging, so as to facilitate cleaning.
The above is a detailed introduction to the automatic feeding mixer, which I hope will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.shanqijituan.com/