全自动上料搅拌机漆面损坏的修复方法_公司新闻_新闻资讯_全自动上料搅拌机车

新闻资讯

行业新闻公司新闻

热点

自动上料搅拌机配件是由哪两部分组成的？

2022-12-23

修路有哪些不错的机械设备？先说说这个小型搅拌车

2022-12-19

自上料搅拌车操作须知的五项重要内容

2022-12-16

自上料拌和车的特征有哪些？

2022-12-12

自动上料搅拌车能哪些施工难题？

2022-12-02

混凝土搅拌车的刹车片要怎样挑选合格

2022-11-14

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

全自动上料搅拌机漆面损坏的修复方法

所属分类：公司新闻发布时间：2020-06-08 来源：http://www.shanqijituan.com 浏览量：0

　　全自动上料搅拌机经常在室外工作，很难避免漆面的损坏。如何修复?

　　The full-automatic feeding mixer often works outdoors, so it is difficult to avoid paint damage. How to fix it?

　　1、油漆氧化:在阳光下，油漆膜会蒸发油来保护自己。如果时间太长，会导致油漆流失太多的油。油漆的亮度和深度会大大降低，使表面慢慢变白，形成氧化层，缩短油漆的使用寿命。其实用肉眼就能看到车漆发黑、发白、无光泽的现象。严重的氧化可以通过研磨和抛光处理。

　　1. Paint oxidation: in the sun, the paint film evaporates oil to protect itself. If the time is too long, the paint will lose too much oil. The brightness and depth of the paint will be greatly reduced, making the surface gradually white, forming an oxide layer, and shortening the service life of the paint. In fact, with the naked eye, we can see the phenomenon of black, white and lusterless paint. Severe oxidation can be treated by grinding and polishing.

　　2、浅划痕:这是由于摩擦和日常护理不当造成的，有轻微划痕，但没有底漆，这种划痕在阳光下或阳光下更明显。一般通过的抛光方法去除。

　　2. Light scratch: it is caused by improper friction and daily care. There is a slight scratch, but there is no primer. This scratch is more obvious in the sun or in the sun. It is generally removed by professional polishing methods.

　　3、褪色:空气中的烟雾和污染物是褪色的原因。变色时，油漆会出现不均匀的色差。在光线暗淡时可进行研磨、抛光处理，严重时必须重新油漆。

　　3. Discoloration: smoke and pollutants in the air are the cause of discoloration. When the color changes, the paint will show uneven color difference. When the light is dim, it can be grinded and polished. If it is serious, it must be repainted.

　　4、交通膜:在行驶过程中由于摩擦而产生很强的静电层，静电对灰尘、油类和化学粉末的吸附非常强，长时间会形成交通膜。这种膜容易引起油漆表面的氧化腐蚀，如果这种情况可以通过打磨抛光处理。

　　4. Traffic film: in the process of driving, a strong electrostatic layer is generated due to friction. The electrostatic adsorption of dust, oil and chemical powder is very strong, which will form a traffic film for a long time. This kind of film is easy to cause the oxidation corrosion of the paint surface, if this situation can be treated by polishing.

　　裂缝:这是由于平时不注意油漆表面造成的。它会渗透到油漆中，直到渗透到整个油漆层。这也可能是由于重新粉刷的质量。如果裂纹中有蜡，则会在本体上发现斑纹裂纹现象。为了防止开裂的现象，我们可以打蜡来减少开裂的发生。

　　Crack: it is caused by not paying attention to the paint surface at ordinary times. It will penetrate into the paint until it penetrates the entire layer. It may also be due to the quality of the repainting. If there is wax in the crack, the phenomenon of spot crack will be found on the body. In order to prevent cracking, we can wax to reduce the occurrence of cracking.

　　全自动上料搅拌机的漆面是保护车辆不受腐蚀的，我们在平时使用中要注意对油漆表面的保护，如果油漆表面有大面积的损坏需要，这样使用寿命才能延长。

　　The paint surface of the full-automatic feeding mixer is to protect the vehicle from corrosion. We should pay attention to the protection of the paint surface in normal use. If there is a large area of damage on the paint surface that needs to be solved, then the service life can be extended.

上一页：全自动上料搅拌车在运输过程中要注意什么下一页：自动上料搅拌机如何重载试运转？