山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻

自动上料搅拌机会发生侧翻的机率?

所属分类:行业新闻 发布时间:2020-06-28 来源:http://www.shanqijituan.com 浏览量:0

  自动上料搅拌机车框架太大 ,轮距太小,过高车的稳定性结果就不言而喻了。这便是会发生侧翻的因素,这点是非常重要的,也是直接关系到了,具体还会如何来看看:
  It is self-evident that the frame of the automatic feeding and mixing locomotive is too large, the track is too small and the center of gravity is too high. This is the factor that will cause rollover, which is very important and directly related to safety. How can we look at it
  我们都知道车的框架是在轮胎之上的,而正因此与地面接触的就是轮胎。那么也就是说判断一个道路是否能过,主要就是看自己的轮距是否在这个道路宽度之内。从而我们也知道,一个混凝土搅拌车的环境适应能力,不仅仅受到发动机的影响,还受到轮距的影响,那么我们自然而然知道小型混凝土搅拌车轮距的选择有就非常重要了。
  We all know that the frame of the car is on the tire, so the tire is in contact with the ground. That is to say, to judge whether a road can pass is mainly to see whether its track width is within the road width. Therefore, we also know that the adaptability of a concrete mixer to the environment is not only affected by the engine, but also by the wheelbase, so we naturally know that the selection of the wheelbase of a small concrete mixer is very important.
              自动上料搅拌机
  轮距和车框架的搭配也是非常重要的。因为上面我们就说车框架是在轮胎之上的。那么合理的轮距承载多大的车框架,必须在合理承受范围之内。正所谓量体裁衣,对车的衣服就是车框架。如果衣服裁的不合理,对于车不仅仅就是不好看那么简单了,它的性也就大大下降。
  It is also very important to match the track width with the car frame. Because we said above that the car frame is on the tire. So the reasonable wheelbase bearing frame must be within the reasonable bearing range. The so-called tailor-made clothes are the frame of the car. If the clothes are not cut reasonably, it is not only not so simple for the car to be ugly, but also greatly reduces its safety.
  以上是关于自动上料搅拌机车发生侧翻因素的介绍,想要了解更多内容欢迎点击http://www.shanqijituan.com网站
  The above is an introduction to the rollover factors of the automatic feeding and mixing locomotive. For more information, please click http://www.shanqijituan.com Official website.

 

首页 产品 电话 置顶