建筑工程是离不开三轮底盘搅拌车的，这时大家都知道的，搅拌车在工地上进行工作，工作环境也是可想而知的，为保障三轮底盘搅拌车的使用性能，在使用完毕后还需及时进行清理，但是洗车过程也不是那么简单，想要给三轮底盘搅拌车洗得干净并且有不对车辆造成伤害的话，您还需要掌握以下几点方法。
The construction project is inseparable from the three wheel chassis mixer. At this time, we all know that the mixer works on the construction site, and the working environment can be imagined. In order to ensure the service performance of the three wheel chassis mixer, it needs to be cleaned in time after use, but the car washing process is not so simple, If you want to clean the three wheeled chassis mixer and do no harm to the vehicle, you also need to master the following methods.
洗车过程中的注意事项：
Precautions during car washing:
一、保持三轮底盘搅拌车的清洁（留意经常和实时地清洗车辆），尽量利用专用车专用的清洗剂和碱性小的肥皂。
1、 Keep the three wheeled chassis mixer clean (pay attention to washing the vehicle frequently and in real time), and try to use the special cleaning agent and alkaline soap for the special vehicle.
二、留意按期上光：专用车行驶一段时间，应举办外貌磨光和上蜡处理惩罚。清洗剂利用的两种要领：一种是磨料型，可擦掉外貌日漆氧化层；另一种是化学清洗剂，可溶解沉积的油污以便擦除。利用时，制止在阳光直射下打蜡。
2、 Pay attention to polish on schedule: when the special vehicle is driving for a period of time, it should be polished and waxed. There are two ways to use cleaning agent: one is abrasive type, which can wipe off the surface of Japanese paint oxide layer; The other is chemical cleaning agent, which can dissolve the deposited oil stain for erasing. When using, do not wax in direct sunlight.
三、雨后实时擦车。
3、 Clean the car in real time after the rain.
四、留意塑料件的洁净要领：三轮底盘搅拌车外观利用塑料件的许多。对上了油漆的塑料件，更要利用上好的清洗剂；上蜡时不能过重，防备穿透油漆暴露底色。
4、 Pay attention to the cleaning essentials of plastic parts: the appearance of three-wheel chassis mixer makes use of many plastic parts. For painted plastic parts, better cleaning agents should be used; Wax shall not be too heavy to prevent penetrating the paint and exposing the background color.
五、留意镀光金属件的保养：对镀光金属件，清洗时应利用炭精洁净剂，不能利用硬质器具刮除脏物。镀光件也应按期上蜡，以掩护镀层不被氧化。
5、 Pay attention to the maintenance of light plated metal parts: for light plated metal parts, carbon cleaner shall be used during cleaning, and hard tools shall not be used to scrape away dirt. The plated parts shall also be waxed on schedule to protect the coating from oxidation.
六、留意防锈：三轮底盘搅拌车油漆和电镀的部件一般都具有精采的防锈能力，但是对付车体上的焊点、接缝以及受过擦伤的部位则容易生锈。因此，车辆在利用一段时间后，应该举办须要的防锈处理惩罚。
6、 Pay attention to rust prevention: the painted and electroplated parts of the three wheel chassis mixer generally have excellent rust prevention ability, but it is easy to rust against the welding spots, joints and scratched parts on the car body. Therefore, after the vehicle is used for a period of time, the necessary anti rust treatment should be carried out.
七、防备零部件早期损坏，制止产生妨碍，担保较高的出车率，耽误水车的利用寿命，获得较佳经济效益。
7、 Prevent early damage of parts, prevent obstruction, ensure high departure rate, delay the service life of waterwheel and obtain better economic benefits.
八、查抄机油里是否进水，制止动员机太过磨损。
8、 Check whether there is water in the engine oil to prevent the mobilization machine from being too worn.
九、查抄三轮底盘搅拌车变速箱是否进水，制止齿轮磨损。
9、 Check whether there is water in the gearbox of three wheel chassis mixer to prevent gear wear.
山汽微信
2022-12-23
首页
产品
电话
置顶